Hi folks, thanks for advice in advance. I purchased a Daystate Revere on May 30th last Friday. On filling it up from the main tank to just over 200 I then turn the bleed valve on the tank and it starts to empty the rifle reservoir. I tried three times and on the fourth time it worked fine. Being a newbie I filled the rifle quite slowly. I have contacted the retailer and their advice was fill it up quickly to see if it sets the valve or blows any crud off. Further advice was cock it when filling, and finally take it back. Any help would be good
Hi Yogi,
one thing you might try is; opening the valve as quickly as possible a more abrupt change in pressure may help the check valve seat better. i had this problem with my old Career 707 9mm.
best of luck
one thing you might try is; opening the valve as quickly as possible a more abrupt change in pressure may help the check valve seat better. i had this problem with my old Career 707 9mm.
best of luck
- Page :
- 1
There are no replies made for this post yet.
Be one of the first to reply to this post!
Be one of the first to reply to this post!
